| Your ref | SKU | DN diameter | Thread | Angle | Qty | Net price |
|---|---|---|---|---|---|---|
| … | KAR 06 GW90 M22X1,5 14mm MOS | DN06 | 22X1.5 | 90° | … | |
| … | KAR 08 GW90 M22X1,5 14mm MOS | DN08 | 22X1.5 | 90° | … | |
| … | KAR 10 GW90 M22X1,5 14mm MOS | DN10 | 22X1.5 | 90° | … | |
| … | KAR 12 GW90 M22X1,5 14mm MOS | DN12 | 22X1.5 | 90° | … |
Crimp-on fitting 90° angle with 22x1.5 nut for pressure washers, DN06-DN12
Crimp-on fitting 90° angle with 22x1.5 nut for pressure washers, DN06-DN12
Lance PlugsAdaptersNozzlesUniversal Threaded FittingsReel Plugs & CubesOtherFerrulesConnectorsSpray guns and lances
No products match selected filters.
Crimp-on fitting for a high-pressure hose with an inside diameter of 6, 8, 10 or 12 mm (DN6, DN8, DN10, DN12), 90° angle, with a 22x1.5 nut - Karcher-type fitting (K5.2 for DN6 and DN8).
Technical data:
- Angle: 90° (elbow)
- Connection: brass nut 22x1.5 (female thread)
- Intended use: DN6 (1/4"), DN8 (5/16"), DN10 (3/8") and DN12 (1/2") hoses, pressure washers
- Condition: new
The fitting is sold without a crimp ferrule. Crimp ferrules are available in the Pressure washer fittings > Ferrules section.