| Your ref | SKU | DN diameter | Thread | Angle | Qty | Net price |
|---|---|---|---|---|---|---|
| … | KAR 06 GW M22X1,5 KRN | DN06 | 22X1.5 | straight | … | |
| … | KAR 08 GW M22X1,5 KRN | DN08 | 22X1.5 | straight | … |
Crimp fitting with stainless steel body and nut 22x1.5 for KRANZLE pressure washers, DN6-DN8
Crimp fitting with stainless steel body and nut 22x1.5 for KRANZLE pressure washers, DN6-DN8
Lance PlugsAdaptersNozzlesUniversal Threaded FittingsReel Plugs & CubesOtherFerrulesConnectorsSpray guns and lances
No products match selected filters.
Crimp fitting for a high-pressure hose with an inside diameter of 6 mm (DN6, 1/4") or 8 mm (DN8) - Kranzle-type fitting with a stainless steel body and a brass nut 22x1.5.
Variants:
- KAR 06 GW M22X1,5 KRN - DN6 (1/4"), Kranzle-type fitting 48.106 for THERM-1 series pressure washers with a drum
- KAR 08 GW M22X1,5 KRN - DN8 (8 mm)
Compatibility (DN6, 48.106):
- Kranzle-type fitting Therm 635-1 (230V)
- Kranzle-type fitting Therm 875-1
- Kranzle-type fitting Therm 895-1
Note: before buying, be sure to check the mounting system of your pressure washer and compare it with the offer.
Technical data:
- Body (connector): stainless steel
- Connection: brass nut 22x1.5 (female thread)
- Intended use: DN6 (1/4") and DN8 (8 mm) hoses, Kranzle pressure washers
- Condition: new
The fitting is sold without a crimp ferrule. Crimp ferrules are available in the section Pressure washer fittings > Ferrules.